Stl Mesh II
From IncendiaWiki
Revision as of 11:35, 28 February 2010 by Aexion (talk | contribs) (Protected "Stl Mesh II" ([edit=sysop] (indefinite) [move=sysop] (indefinite)))
The STL Mesh II is an Incendia baseshape definition for importing 3D meshes
Parameter:
- Radius, radius of the mesh.
This baseshape definition differs from the STL Mesh because it creates an extrude 3D surface for every triangle on the mesh.
- Differences between the STL I and STL II baseshapes for the same mesh
STL I
STL II
